If you have a washing machine that’s more than 15 years old, then it probably has an internal drain line. The problem is that this type of drain line can fill up and cause your washing machine to leak. There are several ways to fix this problem. However, there is one thing that all these options share in common — they involve digging into the floor of your home.
These are some common form of the drainage system that is available for the people in general. A person can go through the options and choose the one that will prove to be a favourable one. There are different drainage options to choose from, the main motive of the people is to analyze and then choose. With time the person will get eth complete idea.
This is not something we recommend for most people because it’s a major hassle. Plus, it could leave a hole in the ground that will make it harder to keep the rain out. If you’re planning on buying a new washer or upgrading your current model, you should consider going with a newer appliance. With today’s technology, it would be nearly impossible to build a new washing machine without having some sort of internal drain line. Here are three different options to consider when choosing how to have your washing machine drained properly.
Option #1: Use the original drain hose
If your washing machine came with an external drain hose, then you should use it instead of digging. This option might seem easier at first glance, but it also comes with some problems. First off, if the hose was buried under concrete or dirt, you’ll need to dig it up before using it. Next, you won’t be able to reuse the hose once you’ve pulled it out of the ground. Finally, you will likely find that the hose leaks after a while. This means that you will have to replace it often. It’s better to just purchase a new hose every time.
Option #2: Use a new hose
If you don’t want to bother with the hassle of digging, you can always buy a new hose. You can purchase either a rubber hose or a plastic tube. Both are made from durable materials that won’t break easily. In fact, both types come in a variety of sizes so you can get the right size hose for your specific situation.
The downside to this option is that you lose the ability to recycle the old hose. As mentioned above, it’s best to buy a new one each time. Another drawback is that you may need to spend a little extra money to replace the hose every now and again.
Option #3: Install a new drain pipe
One of the most popular options for draining a washing machine is installing a new drain line. These lines usually come with a T-shaped fitting that attaches to a drain point inside the house. Once attached, you simply install a new pipe around the outside of the building where the old pipe used to be. Then you connect the two ends of the drain line together. This allows water to flow away from the washing machine.
There are several advantages to this method. One benefit is that you do not have to dig up the old pipes. In fact, you can install the entire system underground. The other advantage is that you can reuse the existing pipes once they’re no longer needed.
However, installing a new drain line isn’t as simple as it sounds. Because the lines can move and shift over time, you will need to reroute them every few years. Also, since you have to drill holes into the walls of the house, it can become quite costly to repair. This is why many people opt to go with Option #2 or Option #4 below.
Option #4: Install a new drain line
Another option for draining a washing machine is to install a new drain line. Many people choose this option because it’s less expensive and easier to install than installing a new drain pipe. This option works well if your washing machine doesn’t have any cracks or tears in its frame. If it does, then you’ll need to install a new drain line anyway, even though it costs more money.
The only real disadvantage to installing a new drain line is that it requires drilling into the wall. This means that you will have to repaint the area afterwards. However, this isn’t too difficult because it will take place during the same time period as painting the room itself.
Option #5: Install a new drain pan
Some people choose to install a new drain pan because it’s cheaper than installing a new drain line. It’s a good idea to avoid this option for washing machines that have cracked frames. Installing a new drain pan will require drilling through the floor. Again, this means that you’ll have to paint the area afterwards.
On the bright side, installing a new drain pan will save you money in the long run. You can also reuse the old pan after it’s done being used. It’s important to remember, however, that this is only possible if the pan is in the basement. If you live on the first floor, you will need to install the new pan in the attic.
In conclusion, you can either try digging up your current washing machine’s drain line or you can buy a new drain line and install it yourself. If you decide to install the new drain line yourself, then you can choose between Option #3 (drilling the drain line into the wall) or Option #4 (installing a new drain pan).